Some Diamond Shelter applications, most often livestock facilities, require the full width of the end frame to be open to a specified height.
Above that height the end is closed in with a Diamond Shelter Half Moon End Frame. It is effective in keeping some of the snow, rain or wind out of the building.
Half Moon End Frames are only available on 28’ to 120’ wide Diamond Shelters.
Diamond Shelters manufactures awnings that can be attached to our shelters on one or both sides running the full or part length of the shelter.
The awnings are used to typically protect the feed in bunkers constructed along the sides of the shelter.
Diamond Shelters offers optional mesh vents for end frame covers. The end wall mesh vents provide ventilation in our shelters while still limiting the amount of wind, rain or snow that enters into the shelter. These vents come in various sizes. An optional retractable flap can be added to the end wall mesh vent so that it can be closed during inclement weather.
As an option, our 12 oz. white covers are available in a flame retardant version that meets or exceeds most local fire regulations. Check with us for other available colors.
Diamond Shelters has optional ponywall mounting brackets for securing our 28’ to 60’ Wide Welded Truss shelters to ponywall foundations.
Freestanding and High Profile Welded Truss Diamond Shelters are often set on a screw pile foundation. We offer optional screw pile mounting plates to secure our shelter to these piles.
Welded Truss Diamond Shelters can be insulated (insulation and strapping supplied by the customer). We offer an insulation package which includes the necessary hardware to install insulation in your Welded Truss Diamond Shelter.
Site constraints or utilizing existing foundations have resulted in many Custom Welded Truss Shelters being designed and manufactured.
If you have a special shelter application where our standard Diamond Shelter will not fit, let us try and find a shelter solution for you.
